because a bunch of people were recommending it.
Also, I managed to install "LinuxCNC Uspace 2.7.0 Debian 9 Stretch"
<http://www.linuxcnc.org/testing-stretch-rtpreempt/>
BUT: there are two issues with that.
1: It does not want to install if there is more than one drive in the
system, which I can dodge by turning other drives off in the BIOS
2: There are issues with pyton, it is trying to use something that is
not there, files missing, when I start the "stepper config"
Ron
On 12/19/19 7:46 PM, Dave Matthews wrote:
On Thu, Dec 19, 2019, 21:39 R C <cjv...@gmail.com> wrote:
Hello all,
finally had some time to install the linux iso (LinuxCNC 2.7.14 Debian 7
Wheezy <http://www.linuxcnc.org/iso/linuxcnc-2.7.14-wheezy.iso>) again,
I used the link as mentioned earlier
(http://www.linuxcnc.org/downloads/) <http://www.linuxcnc.org/downloads/>
I
Why are you trying to install Wheezy instead of Stretch? It looks like it
is barfing on trying to find Wheezy updates on repos that have been turned
off.
I used the Stretch iso and the text installer worked.
Dave
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
