well I did get it installed, but I had to start it with different
kernel options.
It wants to start from /dev/sde, while it installed on /dev/sda
On 12/19/19 9:43 PM, Dave Matthews wrote:
Mine was a stretch install. I booted a live from USB, ran the latency
test and told it to install using the text based installer. I told it
to bypass the network but the rest was defaults.
Dave
On Thu, Dec 19, 2019, 23:29 R C <cjv...@gmail.com
<mailto:cjv...@gmail.com>> wrote:
well I am trying to install
linuxcnc-stretch-uspace-amd64.iso
<http://www.linuxcnc.org/testing-stretch-rtpreempt/linuxcnc-stretch-uspace-amd64.iso>
But it calls the first drive sde, and after that it says it cannot find a
bootable device (it starts grub though) I think that grub is messed up.
and I still don't know if it will do that python stuff right.
On 12/19/19 9:18 PM, Dave Matthews wrote:
The GUI installer has problems with my wifi dongle. The dongle works fine
with after install. The problem is that you can't bypass the network with
the GUI installer.
Dave
On Thu, Dec 19, 2019, 22:41 R C<cjv...@gmail.com>
<mailto:cjv...@gmail.com> wrote:
also, on that Stretch installation. if you try to install on anyting
other then the first sata port, it names the device /dev/sde, even
though it is /dev/sda
I think the installer is broken, I have seen that earlier.
Ron
On 12/19/19 8:05 PM, Dave Matthews wrote:
Odd, Stepconf ran fineon the one I did.
Dave
On Thu, Dec 19, 2019, 21:54 R C<cjv...@gmail.com>
<mailto:cjv...@gmail.com> wrote:
because a bunch of people were recommending it.
Also, I managed to install "LinuxCNC Uspace 2.7.0 Debian 9 Stretch"
<http://www.linuxcnc.org/testing-stretch-rtpreempt/>
<http://www.linuxcnc.org/testing-stretch-rtpreempt/>
BUT: there are two issues with that.
1: It does not want to install if there is more than one drive in the
system, which I can dodge by turning other drives off in the BIOS
2: There are issues with pyton, it is trying to use something that is
not there, files missing, when I start the "stepper config"
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net <mailto:Emc-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net <mailto:Emc-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net <mailto:Emc-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
