On Wed, 3 Jun 2020 at 17:20, Gene Heskett <ghesk...@shentel.net> wrote:

And I just found something else that is a show stopper. That isn't "raft"
> thats blocking the nut entry! it left a tongue the width of the nut, and
> about .4mm thick, centered in the height of the nut channel, and
> blocking the nut insert hole all the way to the bottom.  And it wasn't
> in the preview, that was good.


It is probably in the layer-by-later preview (which you control by sliding
two points up and down a line)
And it is probably a support. It _should_ ping out as there is a gap left
on top of support to prevent prober adhesion.
Het a screwdriver in there and start levering.

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to