On Wednesday 03 June 2020 12:25:24 Thaddeus Waldner wrote: > The .4mm wide “tongue” you describe could be support structure > automatically put there by the Cura slicer. You should be able to > control how/if/where these are placed. > A menu item I've not explored yet. Didn't figure my things needed it. Something else to fiddle with.
> > On Jun 3, 2020, at 11:18 AM, Gene Heskett <ghesk...@shentel.net> > > wrote: > > > > On Wednesday 03 June 2020 11:23:08 Gene Heskett wrote: > >> On Wednesday 03 June 2020 10:33:28 andy pugh wrote: > >>> On Wed, 3 Jun 2020 at 15:26, Gene Heskett <ghesk...@shentel.net> > > > > wrote: > >>>> Question, cura hasn't an obvious line feed speed, > >>>> > >>>> It's in the "Speed" section of the settings. > >> > >> I'll look again the next time I run it, I'd assume 20% low is ok, > >> but 2% high can be trouble? So don't get carried away going up. > >> > >> > >> Cheers, Gene Heskett > > > > And I just found something else that is a show stopper. That isn't > > "raft" thats blocking the nut entry! it left a tongue the width of > > the nut, and about .4mm thick, centered in the height of the nut > > channel, and blocking the nut insert hole all the way to the bottom. > > And it wasn't in the preview, that was good. And this one is also > > doing it (leaving or) forming a post up the middle of the 5mm access > > hole for the grub screw. ??? > > > > The 8mm shaft hole is however an excellent fit. A20 lb push or pull > > puts it on or pulls it off. > > > > And the so called 40mm hub is closer to 39.20mm and only about .1mm > > out of round. For driving this BS-1, thats more than good enough > > for the girls I've gone with. > > > > So, obviously this isn't a working model, yet... > > > > Cheers, Gene Heskett > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author) > > If we desire respect for the law, we must first make the law > > respectable. - Louis D. Brandeis > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users