On Friday 05 June 2020 11:13:19 Dave Matthews wrote: > On Fri, Jun 5, 2020 at 8:34 AM Gene Heskett <ghesk...@shentel.net> wrote: > > After doing that one, i took the right post slider loose and > > loosened its fit on the vertical, as I noted there were Z movements > > that weren't making to the other end of the bar. > > > > And raised the tension in the x belt which turned out to be slack > > enough it was just laying on the right end idler pulley. > > > > But before I try another 10 hour print, I'd like to see an improved > > much better filled tooth profile, my guess is that its 10% or less, > > no high strength fill behind what might be called teeth. I'd like > > to see a 100% fill for at least 4mm behind the teeth, but cura isn't > > doing any of that. Those teeth are 100% crushable all the way to > > the bore reinforcement. > > Do yourself a big favor and print a calibration cube and a benchy. > You may also want to do a temperature tower to figure out your > filament. Printing real parts before you get the numbers figured out > is a waste of time. When I got done with it I found that I could do > most things by taking the Cura defaults and setting bed temp to 60 and > filament in the 190-200 region. > > Dave
I'm already in that area, having read the label on the pla. Currently have cura set for 65/210 for 1st layer, then 195/55 for rest of run. hair spray stopped the bird nest in the middle of the raft. > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
