I build all my own custom printers. Why I am working with LCNC for all
the control.
On 6/5/20 3:05 PM, Martin Dobbins wrote:
I'm really curious about the printer you are using, I don't recognize it from
the pictures what brand is it?
Martin
________________________________
From: Bari
If you have a SLA printer you can do this if it uses top down
projection. You can stop during the photopolymer print process and add
components for support as long as they don't shadow any layer above.
On 6/5/20 9:50 AM, Martin Dobbins wrote:
Quick thought on the teeth with a metal flange. Would it be possible to 3d print just
the teeth and then have two metal flanges that make a hub and "enclose"
(sandwich) the teeth?
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
