You built it? Cool. If you can run it with LCNC, so much the better.
I'd like to know more about this when you have the time. Martin ________________________________ From: Bari I build all my own custom printers. Why I am working with LCNC for all the control. On 6/5/20 3:05 PM, Martin Dobbins wrote: > I'm really curious about the printer you are using, I don't recognize it from > the pictures what brand is it? > > Martin > > ________________________________ > From: Bari > > If you have a SLA printer you can do this if it uses top down > projection. You can stop during the photopolymer print process and add > components for support as long as they don't shadow any layer above. > > On 6/5/20 9:50 AM, Martin Dobbins wrote: >> Quick thought on the teeth with a metal flange. Would it be possible to 3d >> print just the teeth and then have two metal flanges that make a hub and >> "enclose" (sandwich) the teeth? > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users