On Friday 05 June 2020 15:25:49 Thaddeus Waldner wrote: > > What generator software? Openscad, using the thingiverse parametric > > .scad files, cannot render a shaft of more than 9.9mm's, else we > > could do this by enlarging the shaft, so all we'ed have to print was > > a ring of teeth. > > Attached is a picture of a 41T GT2 2mm pulley with a 54mm shaft > diameter. Generated with the same OpenSCAD file. > It took a restart of openscad to do it, but now it works, Thank you Thaddeus.
I now have the .stl for the plastic half with a heavy flange on the bottom that is part flange and a 1mm base the same OD as the outer edge of the flange. Now I need to get some alu big enough to make the rest of it. I'll need an 8mm shaft bore, a back flange on it thats 56mm in diameter, and an inner section to fit inside the plastic that is 42mm in diameter. Thats if I can coax this printer into making it. I am having lack of adhesion problems. The raft keeps coming loose. > I’m using it on a Mac but it should work the same on Linux. This model > is designed to have many features customizable by changing parameters. > You can do this by editing the code directly (eg, find where it says > motor_shaft =6; and change that number to whatever you like). > > Another much nicer way to customize it is to use the customizer tool > panel. Go to View>Hide Customizer and make sure that this option is > unchecked. This brings up a list of spin buttons that lets you adjust > each parameter found in the file. If you turn on Automatic Preview at > the top of the Customizer, it should give you a live preview as you > change parameters. > > If you cannot see the preview then make sure that View>Preview is > checked. > Now, read the rest of my mail and see if anyone has a better idea about the temps so maybe it will stick all the way thru instead of the raft coming loose before its all laid down. Or what to wash it down with for best stick. The used area of the pad is wearing smooth. > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
