On Mon, Jul 20, 2020 at 2:40 AM Gene Heskett <ghesk...@shentel.net> wrote:
> > Am I supposed to be able to write the cura output gcode file to the > printers u-sd card while its printing a differennt file? That would be > handy, replacing the sneakernet I'm doing now. > I set up Octoprint a while back. It works well. My printer connects to the same I use for LinuxCNC with a USB cable. I can now drag and drop on my Mac. I just drag a g-code file to octoprint. I have a webcam and octoprint streams the video of the printer and also makes some plots of things like temperature vs. time for me. The neat thing is that I can monitor the printing process from any place even on my phone. I am still not understanding why you prints are going so slowly. At 20% infilland 2 lines per wall it should be faster. > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
