> -----Original Message-----
> From: Jon Elson [mailto:[email protected]]
> Sent: August-20-20 7:36 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Mist Coolant
>
> On Thu, 20 Aug 2020 at 21:36, John Dammeyer
> <[email protected]> wrote:
> >> The mill I have has flood coolant but I've never used it. Read about
> >> bacterial growth and smell. No way to easily add an expensive
> disk oil separator. Possibly a belt oil separator into the fill hole might
> work.
> >> Thing is the machine shop may go unused for months at a time.
> I used Tri-Cool for a while, and had issues with growth and
> smell. Then, I got a bottle of Encool 9 by Engineered
> Lubricants, a local outfit. I could leave the sump for
> months and have no problem with growth or smell. Really
> good stuff. So, there are good coolants out there. This
> was a flood coolant system.
>
> Jon
>
http://216.119.94.70/Products/Metalworking/MetalworkingProductLine.aspx
A search turned this up. Doesn't look like they sell retail. I doubt to
Canada.
>
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
