On 08/20/2020 09:59 PM, John Dammeyer wrote:
-----Original Message-----
From: Jon Elson [mailto:el...@pico-systems.com]
Sent: August-20-20 7:36 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Mist Coolant
On Thu, 20 Aug 2020 at 21:36, John Dammeyer
<jo...@autoartisans.com> wrote:
The mill I have has flood coolant but I've never used it. Read about bacterial
growth and smell. No way to easily add an expensive
disk oil separator. Possibly a belt oil separator into the fill hole might
work.
Thing is the machine shop may go unused for months at a time.
I used Tri-Cool for a while, and had issues with growth and
smell. Then, I got a bottle of Encool 9 by Engineered
Lubricants, a local outfit. I could leave the sump for
months and have no problem with growth or smell. Really
good stuff. So, there are good coolants out there. This
was a flood coolant system.
Jon
http://216.119.94.70/Products/Metalworking/MetalworkingProductLine.aspx
A search turned this up. Doesn't look like they sell retail. I doubt to
Canada.
Yes, that's the outfit! I am just a happy user. Someday, I
will use up the bottle they GAVE me as a sample, and will
try to buy more. I hope they don't only sell it in 55
gallon drums.
Jon
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
