> From: Jon Elson [mailto:el...@pico-systems.com]
> > I have a question that is probably directed at you.  A while back I 
> > converted a C command line program that creates a bore at an XY
> location using IJ G-codes.   I think you were the author of the C program but 
> I can't remember for sure.  


> Yes, this is clearly derived from my old Pascal source.  I
> still have this source for
> several programs in the original Pascal from 1998.  

> 
> But, I have now created a number of programs for the same
> purpose. These are all in c.
> So, I have versions for rectangular pockets, and rectangular
> "trepanning" where you just cut around the edge of the
> cutout, and then let the slug drop out.  Then it makes a
> finish pass to bring
> the cutout to final size.  I also have programs for round
> holes, "race track" ovals, and spot, drill, tap operations
> on grids and files of X,Y coordinates.  I also have a
> program to do rigid tapping with combo drill/taps from an
> X,Y list.  I also have a program for thread milling.
> 
> Jon

The code fragment I posted was originally in C.  I translated that to Pascal.  
I was just wondering if you were the author of the bore with IJ or R C code.  I 
didn't see any links to the programs on your web site.  

John




_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to