On Sun, 2021-03-28 at 17:05 -0500, Jon Elson wrote: > On 03/28/2021 02:34 PM, Valerio Bellizzomi wrote: > > I am very interested in your programs. In the past I have > > used PyCAM to generate gcode, and even Excel and text > > editors to write gcode, attempted to use BlenderCAM > > without success, still have to test FreeCAD Path Module. > I have put the Pascal source on my web page at : > http://pico-systems.com/codes/gcode/dragon.pas > This makes an engraving program for the Sierpinski > snowflake space filling curve. > http://pico-systems.com/codes/gcode/hilbert.pas > This makes an engraving program for the Hilbert space > filling curve. > http://pico-systems.com/codes/gcode/makebore.pas > http://pico-systems.com/codes/gcode/makering.pas > This program cuts a ring-shaped groove for checking the > spindle tram of a milling machine. > http://pico-systems.com/codes/gcode/maketram.pas > > If you can't access these files let me know, there could be > a permission problem. > > Jon
Thank you very much. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users