On Sun, 2021-03-28 at 13:48 -0500, Jon Elson wrote: > On 03/28/2021 11:52 AM, John Dammeyer wrote: > > The code fragment I posted was originally in C. I translated that > > to Pascal. I was just wondering if you were the author of the bore > > with IJ or R C code. I didn't see any links to the programs on > > your web site. > > > > > Right, I never posted the Pascal source as I thought that > was too far off the beaten path. > My Allen-Bradley control didn't have R arcs, I don't think, > so my original programs all generated > the I and J words. When I moved to EMC in about 1998, I > found it was too picky about start and end radii so I > changed it to use the R words. > > If you want all my old Pascal programs, I could sent them. > Also, I have some newer programs > that I have never put on my web site that do more advanced > movements, like ramping down in Z. > > Jon
I am very interested in your programs. In the past I have used PyCAM to generate gcode, and even Excel and text editors to write gcode, attempted to use BlenderCAM without success, still have to test FreeCAD Path Module. Valerio _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users