On Fri, Jun 11, 2021 at 12:09 PM John Dammeyer <jo...@autoartisans.com> wrote:
> Sam, > Here's the ifconfig output generated from putty running on my WIN-7 > workstation via remote desktop from my WIN-10 ZBook. Ethernet cable from > Pi4 to 7i92 is 2' long. > > And with or without LinuxCNC running this is what I get: > pi@linuxcnc:~ $ cd mesaflash > pi@linuxcnc:~/mesaflash $ sudo ./mesaflash --device 7i92 --readhmid > lbp16_access.send_packet: Operation not permitted > Aborted > > John > > pi@linuxcnc:~ $ ifconfig > eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 > ether dc:a6:32:1e:30:f1 txqueuelen 1000 (Ethernet) > RX packets 29442387 bytes 2826463726 (2.6 GiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 58886151 bytes 1122489823 (1.0 GiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 1000 (Local Loopback) > RX packets 595 bytes 40144 (39.2 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 595 bytes 40144 (39.2 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.0.97 netmask 255.255.255.0 broadcast 192.168.0.255 > inet6 fe80::9d66:1b85:f539:da50 prefixlen 64 scopeid 0x20<link> > ether dc:a6:32:1e:30:f2 txqueuelen 1000 (Ethernet) > RX packets 11119 bytes 3535970 (3.3 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 3108 bytes 415864 (406.1 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > pi@linuxcnc:~ $ > Do you have any other network devices on the 192.168.1.x network? The 192.168.1.1 address is usually reserved for routers in that subnet. Mark _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
