Try to set the jumpers for 192.168.1.121 and your pi4 at 192.168.1.1 or .10...
Something in the mesaflash is having issues that LinuxCNC isn't. At this point no idea what it is and whether WiFi is on or off doesn't seem to matter. John > -----Original Message----- > From: Peter C. Wallace [mailto:p...@mesanet.com] > Sent: June-11-21 11:04 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Pi4 issues with MESA 7i92H > > > I dont see this issue (though if have my 7I92 at 10.10.10.10 and the RPI at > 10.10.10.100) > > pi@raspberrypi:/boot $ uname -a > Linux raspberrypi 4.19.71-rt24-v7l+ #1 SMP PREEMPT RT Thu Jan 23 16:59:28 PST > 2020 armv7l GNU/Linux > pi@raspberrypi:/boot $ mesaflash --device 7i92 --addr 10.10.10.10 --readhmid > Configuration Name: HOSTMOT2 > > General configuration information: > > BoardName : MESA7I92 > FPGA Size: 9 KGates > FPGA Pins: 144 > Number of IO Ports: 2 > Width of one I/O port: 17 > Clock Low frequency: 100.0000 MHz > Clock High frequency: 200.0000 MHz > IDROM Type: 3 > Instance Stride 0: 4 > Instance Stride 1: 64 > Register Stride 0: 256 > Register Stride 1: 256 > > Modules in configuration: > > Module: DPLL > There are 1 of DPLL in configuration > Version: 0 > Registers: 7 > BaseAddress: 7000 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 4 bytes > > Module: WatchDog > There are 1 of WatchDog in configuration > Version: 0 > Registers: 3 > BaseAddress: 0C00 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 4 bytes > > Module: IOPort > There are 2 of IOPort in configuration > Version: 0 > Registers: 5 > BaseAddress: 1000 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 4 bytes > > Module: QCount > There are 1 of QCount in configuration > Version: 2 > Registers: 5 > BaseAddress: 3000 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 4 bytes > > Module: SSerial > There are 1 of SSerial in configuration > Version: 0 > Registers: 6 > BaseAddress: 5B00 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 64 bytes > > Module: StepGen > There are 5 of StepGen in configuration > Version: 2 > Registers: 10 > BaseAddress: 2000 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 4 bytes > > Module: LED > There are 1 of LED in configuration > Version: 0 > Registers: 1 > BaseAddress: 0200 > ClockFrequency: 100.000 MHz > Register Stride: 256 bytes > Instance Stride: 4 bytes > > Configuration pin-out: > > IO Connections for P2 > Pin# I/O Pri. func Sec. func Chan Pin func Pin Dir > > 1 0 IOPort StepGen 0 Dir/Table2 (Out) > 14 1 IOPort StepGen 0 Step/Table1 (Out) > 2 2 IOPort StepGen 1 Dir/Table2 (Out) > 15 3 IOPort StepGen 1 Step/Table1 (Out) > 3 4 IOPort StepGen 2 Dir/Table2 (Out) > 16 5 IOPort StepGen 2 Step/Table1 (Out) > 4 6 IOPort StepGen 3 Dir/Table2 (Out) > 17 7 IOPort StepGen 3 Step/Table1 (Out) > 5 8 IOPort StepGen 4 Dir/Table2 (Out) > 6 9 IOPort StepGen 4 Step/Table1 (Out) > 7 10 IOPort SSerial 0 TXData0 (Out) > 8 11 IOPort SSerial 0 RXData0 (In) > 9 12 IOPort SSerial 0 TXData1 (Out) > 10 13 IOPort SSerial 0 RXData1 (In) > 11 14 IOPort QCount 0 Quad-IDX (In) > 12 15 IOPort QCount 0 Quad-B (In) > 13 16 IOPort QCount 0 Quad-A (In) > > IO Connections for P1 > Pin# I/O Pri. func Sec. func Chan Pin func Pin Dir > > 1 17 IOPort None > 14 18 IOPort None > 2 19 IOPort None > 15 20 IOPort None > 3 21 IOPort None > 16 22 IOPort None > 4 23 IOPort None > 17 24 IOPort None > 5 25 IOPort None > 6 26 IOPort None > 7 27 IOPort None > 8 28 IOPort None > 9 29 IOPort None > 10 30 IOPort None > 11 31 IOPort None > 12 32 IOPort None > 13 33 IOPort None > > pi@raspberrypi:/boot $ > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
