> From: Gregg Eshelman via Emc-users [mailto:emc-users@lists.sourceforge.net] > > Does FreeCAD's gear wizard support both Diametral Pitch and Module gears now? > Doesn't look like it based on the menu I've attached here. John
> > On Wednesday, December 15, 2021, 04:36:00 PM MST, John Dammeyer > <jo...@autoartisans.com> wrote: > > I still haven't been able to make a simple circle in FreeCAD.� I keep > looking for the Alibre way of doing it which for my brain has > always been close to perfect.� Never could use AutoCAD and I find Fusion360 > confusing . > However the gear tool is quite nice in FreeCAD. > > I'm still having some problem visualizing exactly how the gears turn to > create 67:1.� So I thought I'd blow a bunch of money on > filament and print them.� In hindsight I should have expanded the pinion > holes to 22mm since that's a standard (cheap) bearing size. > > Too late now.� Just over 2 hours before the other 4 are done.� I could make > some tubes that hold smaller diameter ones.� � Or just > play with the motion here first.� See how it works and then decide if I want > to use my module 1.0mm cutters to make them out of > metal. > > Or just print ones with inset relief to hold 8x22x7 standard bearings. > John > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users