On Fri, 4 Nov 2022 at 05:11, gene heskett <ghesk...@shentel.net> wrote:
> EMBED_TAB_NAME= cam_align
> > EMBED_TAB_COMMAND= qtvcp -d -c cam_align -x {XID} cam_align
> And this is the same, a show stopper but the error msg is more specific,
> so It might be progress.
> It now errors and quits with:
>
> camera-postgui.hal:1: Pin 'mm_xacc.max' does not exist
>
I meant _just_ do that. No random hal files, no random zip files. Just a
normal LinuxCNC install with those two lines in the "display" section.
camera-postgui.hal
Where did that come from?
> And all the missing mm_0nets there are sourced in check_constraints.hal,
And where did that come from?
> which is not included in any
> postgui.hal reference. If its supposed to be, document it!
>
Yes _you_ should certainly document any hal files that _you_ write.
Andy, or whoever might be the expert, there ought to be ONE install.txt
> in that zip,
Which zip? I didn't refer to any .zip. If there is a .zip then it is
_nothing_ to do with the LinuxCNC distribution.
Sorry, but I am completely unable to advise you what might be wrong with
random zip files that you download from the internet.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
