On 3/16/23 20:47, Leonardo Marsaglia wrote:
Hi Gene,
Well, it's a little tricky because of the amount of cables I have running
next to the ones of the spindle. But I checked the integrity of the cable
and by visual inspection it all looks alright. It's a 3 wire cable with the
black insulating cover so it's pretty well protected.
I really doubt the cable is the problem from what I've experienced and from
the condition of the cable in general.
I'd measure all 3 conductors just to satisfy my curiosity. Anything
under an ohm s/b be good yet, on a 4 wire measurement. 2 wire from a std
dvm can lie like a rug. Bad leads, Bad fuse that looks great. BTDT
Leonardo. 4 wire is where the current running thru the cable to measure
it,is coming from a different src, so the meter does not see the meters
leads, only the voltage drop across the wire being tested.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
