Hi Peter,
> Do you mean a SSerial card with multiple encoders/frequency counters? > Yes, that's what I need > A 7I90 could probably be convinced to do that I was mostly inclined to the 7i53 because I like the screwed terminals By the way. I've never done this before but can you plug several anything I/O cards like 7i93 for example to a 7i94 or better yet to a 7i44? Or is this only intended for daughter SSerial cards? Thanks! El mar, 3 dic 2024 a las 22:58, Peter Wallace (<p...@mesanet.com>) escribió: > On Tue, 3 Dec 2024, Leonardo Marsaglia wrote: > > > Date: Tue, 3 Dec 2024 12:27:33 -0300 > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: [Emc-users] Question about mesa 7i53 > > > > Hello guys, hope you're all doing well > > > > I'm in the process of retrofitting a grinder and I'm deciding which MESA > > combo I'm going to use. > > > > I'm going to need to read lots of encoders because I plan to use gauges > for > > "in process" outside diameter measurements. The idea is to feed the > output > > of the gauges as a fixed 50% duty cycle variable frequency signal to the > > mesa board. > > > > The main concern to decide my configuration is: Is there a 7i53 like > board > > that uses the SERIAL I/O interface instead of the 50 pin connector? > > > > Thanks as always for your help. > > > > Leonardo > > Do you mean a SSerial card with multiple encoders/frequency counters? > A 7I90 could probably be convinced to do that > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Peter Wallace > Mesa Electronics > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
