On Wed, 4 Dec 2024, Leonardo Marsaglia wrote:
Date: Wed, 4 Dec 2024 08:27:24 -0300
From: Leonardo Marsaglia <ldmarsag...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Question about mesa 7i53
Hi Peter,
Do you mean a SSerial card with multiple encoders/frequency counters?
Yes, that's what I need
A 7I90 could probably be convinced to do that
I was mostly inclined to the 7i53 because I like the screwed terminals
By the way. I've never done this before but can you plug several anything
I/O cards like 7i93 for example to a 7i94 or better yet to a 7i44? Or is
this only intended for daughter SSerial cards?
No, just sserial cards, though you can use up to 4 Ethernet Anything I/O cards
on one PC (with multiple Ethernet ports on the PC or by using a switch)
Thanks!
El mar, 3 dic 2024 a las 22:58, Peter Wallace (<p...@mesanet.com>) escribi??:
On Tue, 3 Dec 2024, Leonardo Marsaglia wrote:
> Date: Tue, 3 Dec 2024 12:27:33 -0300
> From: Leonardo Marsaglia <ldmarsag...@gmail.com>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net
>
> Subject: [Emc-users] Question about mesa 7i53
>
> Hello guys, hope you're all doing well
>
> I'm in the process of retrofitting a grinder and I'm deciding which MESA
> combo I'm going to use.
>
> I'm going to need to read lots of encoders because I plan to use gauges
for
> "in process" outside diameter measurements. The idea is to feed the
output
> of the gauges as a fixed 50% duty cycle variable frequency signal to the
> mesa board.
>
> The main concern to decide my configuration is: Is there a 7i53 like
board
> that uses the SERIAL I/O interface instead of the 50 pin connector?
>
> Thanks as always for your help.
>
> Leonardo
Do you mean a SSerial card with multiple encoders/frequency counters?
A 7I90 could probably be convinced to do that
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
