> > A regular (non-T) 7I92 may be too small to fit all 24 counters But I can > see > what fits. What 7I80DB model do you have? (-16 or -25)
I have a 7i95 that I plan to use with the 7i70 and 7i71. But I also have the 25 pins port on the 7i95 so it would be possible to use the 7i89 with that firmware just for counting right? El vie, 6 dic 2024 a las 11:55, Peter Wallace (<p...@mesanet.com>) escribió: > On Fri, 6 Dec 2024, Leonardo Marsaglia wrote: > > > Date: Fri, 6 Dec 2024 09:02:50 -0300 > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: Re: [Emc-users] Question about mesa 7i53 > > > > Hi Peter, > > A 7I89 with all encoders having only 'A' pins > > would give you 24 channels of frequency counters > > if thats whats required. You could also have a > > mix of normal encoders for normal motion use > > and 'A' only ones used just for frequency > > counting. > > > > >That would be a really nice solution. I could use a 7i80DB (I'm not sure > >the 7i92 can be connected to the 7i89) to interface with the 7i89. > > A regular (non-T) 7I92 may be too small to fit all 24 counters But I can > see > what fits. What 7I80DB model do you have? (-16 or -25) > > > Is there a firmware already available for the A input only encoders? > > Generally, yes. Specificall for the 7I89, no > > > What other I/O do you need in the configuration? > > El miÿÿ, 4 dic 2024 a las 18:10, Peter Wallace (<p...@mesanet.com>) > escribiÿÿ: > > > On Wed, 4 Dec 2024, Leonardo Marsaglia wrote: > > > > > Date: Wed, 4 Dec 2024 08:27:24 -0300 > > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > > Reply-To: "Enhanced Machine Controller (EMC)" > > > <emc-users@lists.sourceforge.net> > > > To: "Enhanced Machine Controller (EMC)" < > emc-users@lists.sourceforge.net > > > > > > Subject: Re: [Emc-users] Question about mesa 7i53 > > > > > > Hi Peter, > > > > A 7I89 with all encoders having only 'A' pins > > would give you 24 channels of frequency counters > > if thats whats required. You could also have a > > mix of normal encoders for normal motion use > > and 'A' only ones used just for frequency > > counting. > > > > How many encoders fit in the firmware depends on > > the FPGA size so this is still TBD especially on the > > smallest (XC6SLX9) FPGAs > > > > Peter Wallace > > Mesa Electronics > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > Peter Wallace > Mesa Electronics_______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
