It's weird because I'm running it on one of the N7s but the other one doesn't have the option. I thought it was a problem with the advanced license but that unit has been running OSPF for years now which wouldn't be happening with a bad license.
Joshua Sanders Asst. Vice President - Systems Operations Western Mutual Insurance Group PO Box 19626 | Irvine, CA 92623-9626 From: Reese Borel <[email protected]> To: "Enterasys Customer Mailing List" <[email protected]> Date: 11/13/2014 12:53 PM Subject: RE: [enterasys] Cannot enable PIM on N7 Same here. We are running it but with 7.x firmware. Thanks, Reese From: Yingst, Christopher [mailto:[email protected]] Sent: Thursday, November 13, 2014 9:57 AM To: Enterasys Customer Mailing List Subject: Re: [enterasys] Cannot enable PIM on N7 We are have PIM-SM running on those blades, but we are at FW 07.66.04.0002 Chris Yingst - Consultant ECE - Networking | Network Security 207.619.4472 From: "[email protected]" <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Thursday, November 13, 2014 at 10:43 AM To: Enterasys Customer Mailing List <[email protected]> Subject: [enterasys] Cannot enable PIM on N7 I have two identical N7 chassis switches at my two corporate offices. The only differences is two blades in my corporate office are 10/100 7H4382-49s and the 2 blades in the matching chassis at my DR site are 10/100/1000 7G4285-49. Both units are running the 6.12.08.003 firmware and I have the advanced routing license installed on both units. For some reason I can't run a ip pim command from the router config. It looks like nat, slb, and twcb are unavailable as well. Is this a limitation of the 7H4382 DFE? Joshua Sanders Asst. Vice President - Systems Operations Western Mutual Insurance Group PO Box 19626 | Irvine, CA 92623-9626 --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] The information transmitted, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited, and all liability arising therefrom is disclaimed. If you received this in error, please contact the sender and delete the material from any computer. Axiall Corporation (formerly known as Georgia Gulf corporation) is a Delaware corporation. This communication may come from Axiall Corporation or one of its subsidiaries. --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
