You need at least 256M Ram to run pim . My two cents Regares
Enviado do meu iPhone No dia 13/11/2014, às 21:18, "[email protected]" <[email protected]> escreveu: > It's weird because I'm running it on one of the N7s but the other one doesn't > have the option. I thought it was a problem with the advanced license but > that unit has been running OSPF for years now which wouldn't be happening > with a bad license. > > Joshua Sanders > Asst. Vice President - Systems Operations > > Western Mutual Insurance Group > PO Box 19626 | Irvine, CA 92623-9626 > > > > > From: Reese Borel <[email protected]> > To: "Enterasys Customer Mailing List" <[email protected]> > Date: 11/13/2014 12:53 PM > Subject: RE: [enterasys] Cannot enable PIM on N7 > > > > Same here. We are running it but with 7.x firmware. > > > Thanks, > Reese > > From: Yingst, Christopher [mailto:[email protected]] > Sent: Thursday, November 13, 2014 9:57 AM > To: Enterasys Customer Mailing List > Subject: Re: [enterasys] Cannot enable PIM on N7 > > We are have PIM-SM running on those blades, but we are at FW 07.66.04.0002 > > > Chris Yingst - Consultant > ECE - Networking | Network Security > 207.619.4472 > > > From: "[email protected]" <[email protected]> > Reply-To: "[email protected]" <[email protected]> > Date: Thursday, November 13, 2014 at 10:43 AM > To: Enterasys Customer Mailing List <[email protected]> > Subject: [enterasys] Cannot enable PIM on N7 > > I have two identical N7 chassis switches at my two corporate offices. The > only differences is two blades in my corporate office are 10/100 7H4382-49s > and the 2 blades in the matching chassis at my DR site are 10/100/1000 > 7G4285-49. Both units are running the 6.12.08.003 firmware and I have the > advanced routing license installed on both units. For some reason I can't run > a ip pim command from the router config. It looks like nat, slb, and twcb are > unavailable as well. Is this a limitation of the 7H4382 DFE? > > Joshua Sanders > Asst. Vice President - Systems Operations > > Western Mutual Insurance Group > PO Box 19626 | Irvine, CA 92623-9626 > --To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] > > > > NOTICE - This communication may contain confidential and privileged > information that is for the sole use of the intended recipient. Any viewing, > copying or distribution of, or reliance on this message by unintended > recipients is strictly prohibited. If you have received this message in > error, please notify us immediately by replying to the message and deleting > it from your computer. > --To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] > > > > The information transmitted, including any attachments, is intended only for > the person or entity to which it is addressed and may contain confidential > and/or privileged material. Any review, retransmission, dissemination or > other use of, or taking of any action in reliance upon, this information by > persons or entities other than the intended recipient is prohibited, and all > liability arising therefrom is disclaimed. If you received this in error, > please contact the sender and delete the material from any computer. Axiall > Corporation (formerly known as Georgia Gulf corporation) is a Delaware > corporation. This communication may come from Axiall Corporation or one of > its subsidiaries. > > > > --To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] > --To unsubscribe from enterasys, send email to [email protected] with the > body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
