Julian,
This is strange. When there is enough light, the camera should go higher by
itself, in my opinion. If I shut off the flash, it will go higher.
Maybe there's a function to set for this.
Pierre
At 18:25 2/17/2001 -0500, you wrote:
>Hello Pierre,
>
>If P mode decides not to use High-Speed sync, it seem that you cannot
>use the wheel to force high-speed.
>
>However, you CAN get P mode to suggest High-Speed Sync, but only if the
>metered light level is bright enough for the film sensitivity.
>
>So, you can try this by setting ISO 6400 (afterwards, don't forget to
>set it back to the correct value for your film).
>
>I have only tried this for the Elan 7E and 550EX.
>Does it work for your 420EX?
>
>Cheers
>Julian Loke
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
