> I just got my 28-135 IS a few days ago and like it very much (an upgrade > from my 28-70 f3.5-4.5). But I found something funny about it. When I was > shooting it with EOS 5, I found the picture jittered a bit during focusing. > However, I don't seem to get the same problem with EOS 3. Is this normal? > Also, the zoom ring is slightly stiffer when I zoomed beyond 100. I noticed > the barrel actually contracts inward. Is this reason why it's stiffer? The > pictures from the lens turn out to be pretty good (thanks to IS). But if > there is any known problem, I'd like to get it resolved b4 it's too late (I > can get it exchanged within the first week or so...). Any comments?
IS only works on the EOS 5 when the camera shutter release button is depressed half-way. If you have CF-4 set to "1", the "*" button alone will not turn on IS. On the EOS 3, IS works when the camera is set to any focusing mode. (assuming the lens is set to "1".) Dave Herzstein [EMAIL PROTECTED] http://www.kjsl.com/~dave ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
