----- Original Message ----- From: <[EMAIL PROTECTED]>
> Marc, > > How far were you from your subject? What f/stop did you use? I was using the flash manually at 3 meters (maximum) from the statue, the camera was on tripod (of course) in bulb mode at f8 with a Provia 100 with a zoom set at 28mm at 4 metres of the statue and I used the RC . The statue turned out green (you know the effect I assume) and - very bizar- the lights of the passing cars are visible. So the only logical explanation to me was that the flash isn't giving is maximum output when pushing the red light but ... > The 380EX .... it *does* fire full power when you > push the pilot button, If you're shure about that, I propose we *stop* this thread , I'll do some testing (with for instance a 400 ISO film) and come back with the results. > How many times? I'm a bit embarrased to say but I did it just ones that week-end. I mean flashing the statue with the EX380.:-) > > Groetjes, Idem Marc > > PS: Kom je volgende zondag naar de fotobeurs??? Ik heb nog niks van jou gehoord.... Nog effekes wachten aub. Wellicht wel. * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
