Hello Stefan, I modified the config file for wall with other points you mentioned, but stil no luck :(. This time I can not see anything on kanalSol1 and kanalSag1. To be clear, what I try to do is a wall which has a 180 degree view through `kanalSol1 + kanalSol2 + kanalSag1 + kanalSag2`(i.e. monitors are placed next to each other). Thanks in advance.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stefan Eilemann Sent: Friday, March 13, 2009 3:57 PM To: Equalizer Developer List Subject: Re: [eq-dev] eqOSG on two nodes On 13. Mar 2009, at 13:49, mfuluat wrote: > I would like to generate a 180 degree view with two nodes which have > one video card an two outputs respectively; totally four outputs. I > prepared following configuration but when I used it; both left and > right windows generate same two view in each node. What might be the > problem? You have to define viewports for your channels, right now you have two full-window channels per window, so the last one wins and overwrites the previous channel rendering. The attached config remaps your config to a single window, which does the job. > By the how can I generate achieve same 180 with wall configuration? You define your total wall size so that your distance to the wall is wall_width/2. HTH, Stefan.
2Node4ViewProjection.eqc
Description: Binary data
_______________________________________________ eq-dev mailing list [email protected] http://www.equalizergraphics.com/cgi-bin/mailman/listinfo/eq-dev http://www.equalizergraphics.com
