RE: [COUPERS-TECH] Fuel Pump

Sun, 5 Sep 2004 07:28:47 -0700 

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Do not change it .  It needs to be like that .   Ken
----- Original Message -----
From: Elaine Campbell
To: [email protected]
Sent: Sunday, September 05, 2004 9:04 AM
Subject: [COUPERS-TECH] Fuel Pump

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
While replacing fuel pump on '67 A2A, mechanic is surprised to find, the diameter of the orifice in the out-take connector is smaller than the diameter in the in-take connector of the pump. Can someone suggest a reason for this difference in diameters? Is it an anomaly with a purpose? The plane flies OK with this configuration on the pump. However, the mechanic intends to conform both connectors to the larger diameter on the new pump. Any thoughts?
 
John C.
N5466F
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/

Reply via email to