----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi Mike, I had a small leak coming from the rivets around the drain on my header tank. I bought a two part compound called "Pro Seal", I believe, from Aircraft Spruce. It is an FAA approved product and dried semihard when cured. It costs about 45 bucks. It has been several years since the repair where it was seeping and no problems. It's grea stuff as far as I'm concerned. Of course if you have tank corrosion, rather than a couple of leaking rivets, them the John Wright Sr. rebuild would be better. Good luck, Marty Duke N10743 KRNT ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
