----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Forwarded on behalf of David Abrams.
From: David Abrams
[mailto:[EMAIL PROTECTED]
Sent: Sunday, November 05, 2006
8:06 PM
To: '
Subject: RE: [COUPERS-TECH]
Ercoupe side windows
Ed
I cannot post to the list (it is fussy
about email addresses in a way I cannot fix) but...
I recently replaced my windows. The
old ones were getting scratched by the bottom of the inner skins. I found
some adhesive backed felt at my local crafts store and cut a piece to place on
the inside bottom of the inner skins. I was able to place it up about 4
inches on the inside without removing the skins. The new windows are not
getting scratched. A better material would be something that does not
collect dirt like teflon or poly sheeting.
David
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.28/518 - Release Date: 11/4/2006
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
