Does cylinder my more sense? I really didn't mean "head." Frank Nelson
--- In [email protected], "John Cooper" <[EMAIL PROTECTED]> wrote: > > Run again! You can pull the head on an Indian, but not on a C85... > > John Cooper, A&P > > Skyport Services > > PO Box 249 > > 4996 Delaware Tnpk > > Rensselaerville, NY 12147 > > 518 797-3064 > > Fax 518 797-3865 > > www.skyportservices.net > > > -----Original Message----- > From: [email protected] [mailto:ercoupe- [EMAIL PROTECTED] On > Behalf Of fnelson913 > Sent: Monday, October 22, 2007 3:59 PM > To: [email protected] > Subject: [ercoupe-tech] Sticky Valve Saga > > I got my Ercoupe back from the "let's replace everything" A&P along > with a bill for $800.00 in labor and $50.00 worth of parts. That > included replacing tires, bleeding the brakes, removing and > replacing the cowling and propeller, replacing the front crank seal, > and diagnosing of a stuck valve (or two). I took my logbooks and ran > per the recommendation that was posted here (very good advice > indeed). > > I just talked to another A&P. I asked if he knew about the rope > trick (see... I am learning) and he said "you mean the Indian rope > trick?" I said that I had never heard it called that, but he assured > me that it was used on Indian motorcycles. WOW... a knowledgeable > person who is old enough to know about Indian motorcycles! I must > have stumbled on to the mother lode. He said that he would rather > just pull the head and send it to the shop. He then told me he would > charge me two hours to pull the head and replace it (OMG... an > estimate for the work before the work is started!!!). He told me the > shop would charge between $200.00 and $300.00 as long as he didn't > bring them the cylinder too. He located my bird and is working on it > as we speak. > > Is there cause for jubilation or would that be premature? > > Frank Nelson > (Might still be able to finish my checkride this month.) > Broken N51DV - 415-C > S/N 2024 > TOA / California > > > > > > > > > Yahoo! Groups Links >
