Are you talking about the flapper for carb heat. I found mine lose too. On the back side of the box, I found a nut on the shaft going thru the box. I tightened the nut and that fixed the problem.. Gordon Smith (JOT) Illinois Socialism will eventually run out of other peoples money.
--- On Sat, 8/1/09, Garrard Olinger <[email protected]> wrote: From: Garrard Olinger <[email protected]> Subject: [ercoupe-tech] RE: Master Cylinder Kit SMK-88 Bleeding Brakes To: "'Garrard Olinger'" <[email protected]>, [email protected] Cc: "'Jim Truxel'" <[email protected]> Date: Saturday, August 1, 2009, 3:32 PM Got one additional problem (annual time). The airbox/carb heat valve is loose. Is there a rebuild kit for these old airboxes? Gene From: Garrard Olinger [mailto:[email protected]] Sent: Saturday, August 01, 2009 4:31 PM To: [email protected] Cc: 'Jim Truxel' Subject: Master Cylinder Kit SMK-88 Bleeding Brakes Good afternoon all, We are trying to install a new Skyport master cylinder for the brakes. Original breaks were mushy. Got the old one out, what a deal! Then put in replacement, but no pressure and no breaks. Tried bleeding by opening and closing the brake lines at the wheels but no pressure. No apparent leaks noted. Any advice? Gene Olinger and Jim Truxel
