Bill, Could you scan and post the drawings?
Thanks, Bill To: [email protected] From: [email protected] Date: Mon, 10 May 2010 17:23:14 -0500 Subject: Re: [ercoupe-tech] Re: Lost Buss Bar All, Let's not each run out and individually re-invent the wheel. There is a very clear electrical diagram in the Forney Service Manual on page 39. It shows how to hook up radio and accessory equipment, anti-collision beacon (or strobe), landing light, taxi light, panel lights, map light and nav lights with a buss and switched circuit breakers. If you consult the M10 wiring diagram, it shows how to wire in a starter solenoid. Needless to say, this is all "approved data" making any 337 pretty much of a "slam dunk" if you have an honest FSDO ;<) Regards, William R. Bayne .____|-(o)-|____. (Copyright 2010) -- On May 10, 2010, at 15:19, texasaviator wrote: I see a lot of uncertainty here. I have just rewired an entire coupe with full instruments, 60 amp alternator, solenoid, etc and have a complete diagram that may be useful to the group. I will try to re-create it in .pdf format and post it here for public use. I threw the switch and everything worked. Alan Fairclough N94694 _________________________________________________________________ The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
