Martin,
eMapSite were having the same 'freeze' issue in a beta version of 6.2 but
once the full release version was installed we have had no problems and
start up is if anything faster than before.
Not sure if this is associated to your issues or not.
Regards
Miles Gabriel
___________________________________
Miles Gabriel
Reseller Programme Manager
Tel: +44 (0) 118 973 6883
Fax: +44 (0) 118 973 0002
Email: [EMAIL PROTECTED]
Website: http://www.emapsite.com
Mirror site: http://212.187.235.228
"A cost effective solution for the acquisition and management of digital
geographic data"
__________________________________
At 11:11 AM 7/27/01 , you wrote:
>----------------------------------------------------------------------
>
>From: Martin Kjelgaard Rosengreen <[EMAIL PROTECTED]>
>Subject: SV: ERMapper 6.2
>Date: Thu, 26 Jul 2001 14:12:51 +0200
>Reply-To: [EMAIL PROTECTED]
>Hello list,
>
>After upgrading to ERM 6.2 on an NT4/SP6 system, I get a couple of 'blue
>screens' a day, and the occasional 'freeze' when launching ERMapper. I do
>not recall it ever happening when running 6.1.
>
>Any suggestions?
>
>Thanks,
>
>Martin
>-----------------------------------------
>Martin Rosengreen
>GIS/Raster Consultant
>Kampsax Mapping Division
>Stamholmen 112
>2650 Hvidovre
>Direct: +45 36 39 09 53
>Switchboard: +45 36 39 07 00
>E-mail: [EMAIL PROTECTED]
>http://www.kampsax.com
>------------------------------------------
>----------------------------------------------------------------------
>
>From: "Leo M. Romeijn" <[EMAIL PROTECTED]>
>Subject: RE: DEM Z Scale & Elevation incorrect
>Date: Thu, 26 Jul 2001 08:00:17 -0700
>Reply-To: [EMAIL PROTECTED]
>Mike,
>
> Thanks for the input. I mentioned the Z Scale for trouble shooting
>purposes. I did notice that by changing the Z Scale it did not change the
>elevation values in the cell coordinate view. I did check the elevations of
>the examples/Functions_And_Features/3D/Landsat_over_DTM.alg, and I was
>getting an elevation of 23 on the water.
>
>Leo M. Romeijn
>Geodetic Positioning Service, Inc.
>Woodland, WA, USA 98674
>(360) 225-0625 ~ (360) 225-0833 (Fax)
>[EMAIL PROTECTED]
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
>Behalf Of Mike Dunne
>Sent: Wednesday, July 25, 2001 7:28 PM
>To: [EMAIL PROTECTED]
>Subject: RE: DEM Z Scale & Elevation incorrect
>
>Leo,
>The cell values should not change with the Z scale.
>I just tried it on examples/Functions_And_Features/3D/Landsat_over_DTM.alg
>and it seemed to work correctly. The only things I can think of are that
>the the current layer was changed in between swapping view modes, or maybe
>something to do with the final transform.
>
>Let me know if I have missed something, and/or you can get it to happen on
>the alg quoted above (the water is a good bit to test).
>
>cheers
>Mike
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Leo M. Romeijn
> > Sent: Thursday, 26 July 2001 1:35 AM
> > To: ER Mapper List Server
> > Subject: DEM Z Scale & Elevation incorrect
> >
> >
> > Hi list,
> >
> > I have a DEM with Landsat TM 7 draped over the top.
> > Both Files are .ers
> > (raster data files). When I go to 3D Perspective view the Z
> > Scale (%) is at
> > 7291, which makes the 3D image look like spikes. I change the
> > Z Scale (%) to
> > 300, which makes it looks more realistic. When I use the Cell
> > Coordinate
> > command to check elevation values, the values are low +/- 500
> > meters. When I
> > check the cell values in the normal view mode the elevations
> > are correct.
> > Does anyone know why this is happening?
> >
> > Thanks,
> >
> > Leo M. Romeijn
> > Geodetic Positioning Service, Inc.
> > Woodland, WA, USA 98674
> > (360) 225-0625 ~ (360) 225-0833 (Fax)
> > [EMAIL PROTECTED]
> >
> >
> > -----------------------------------------------------------
> >
> > To make changes to your subscription, please visit our
> > website, http://www.ermapper.com/technicl/ermapperl/index.htm
> >
> >
>-----------------------------------------------------------
>
>To make changes to your subscription, please visit our website,
>http://www.ermapper.com/technicl/ermapperl/index.htm
>
>----------------------------------------------------------
>To stop receiving the daily digest, send email to [EMAIL PROTECTED]
>with the command
> set mode standard ermapper-l
>in the body.
-----------------------------------------------------------
To make changes to your subscription, please visit our website,
http://www.ermapper.com/technicl/ermapperl/index.htm
