Chris Scharff [EMAIL PROTECTED] wrote: > Excuse my fuzzy brain, but can the scope of the IMS be set to 'this > server'? If so, I believe that ought to cause the Exchange server to > route outbound mail for itself given your described environment.
Ah, good catch! You can set it to "this location" which is the same thing as this server. However, what that apparently means is that the E5.5 server will only send its email through itself, and not connect to other servers to send it. Other servers can still send through the E5.5 server. What I apparently could use is the same radio button on the E2K3 server, but I can't find it. Nor can I find the place in E2K3 to add orgs to the <inbound> list on the IMS from E5.5 Routing Tab. I'm actually going to wimp out and install an E2K3 test server into my existing E5.5 test site. I know it's more stuff for AD, but our forest is very small anyway. And after all, what good is an MSDN license if we're not going to set up test servers to break stuff on so we don't break production? I have E5.5 on an old Micron workstation, and I'm going to set up E2K3 on an old Proliant 800 with a new ADC to connect the two. It'll be groovy! Thanks for all the help, guys. This is a great group. I'm sure I'll have more questions as time goes on. Hope I can help out now and again. ==================================== Larry Wahlers, Systems Specialist Concordia Technologies The Lutheran Church - Missouri Synod _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
