Look for ExDeploy folder on the Exchange 2003 server CD, it is in the Support directory. If you follow ExDeploy, you will avoid most common mistakes. Microsoft specifically designed this tool to help people avoid mistakes that people used to make all the time with Exchange 2000 migrations.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fyodorov, Andrey (Citco) Sent: Tuesday, July 25, 2006 11:15 AM To: Exchange Discussions Subject: RE: Repercussions of the active directory connector. Exchange 2003 comes with a whole wizard that sets up your ADC connection agreements and checks everything that needs to be checked. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Couch, Nate Sent: Tuesday, July 25, 2006 11:05 AM To: Exchange Discussions Subject: RE: Repercussions of the active directory connector. Neil, Here is what the admin who worked on the mgration sent to me. I hope it helps. I don't know if the migration document mentioned is from MS or some other engineer, but here is what we learned. "The 2003 migration document did not indicate we needed to check this box when creating the connection agreements for each site. The "Replicate Secured objects" checkbox is at the bottom of the Windows tab on the Connection Agreement. Without it, replication of AD objects will not get to 5.5. This will also cause duplicate mailboxes if the user's mailbox was manually created in 5.5 because it wasn't replicating over, then you really have a mess." Regards. Nate -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Neil Doody Sent: Tuesday, July 25, 2006 7:45 AM To: Exchange Discussions Subject: RE: Repercussions of the active directory connector. Weve had AD setup for a while, I've done a pilot system with ADC which works perfectly and I've got instruction steps in my head which should do exactly what we need. The problem is the size of the organisation and the fact they are retaining there old email address so I have to use ADC to allow me to migrate people over time whilst still maintaining all of the email on a single domain flowing. The setup and migration is easy enough, I've gone through it enough times its just the problems that arise afterwards which somebody has mentioned I am now investigating as I don't want to run into problems after I have migrated people. Thanks again for all help. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:bounce- > [EMAIL PROTECTED] On Behalf Of Andy Blevins > Sent: 25 July 2006 13:38 > To: Exchange Discussions > Subject: RE: Repercussions of the active directory connector. > > There are a few options when it comes to migrating from 5.5 to 2003. The > least expensive (if you know what you're doing) is to implement the ADC, > add some exchange 2003 servers to your existing org, and just do a move > mailbox operation. The ADC is pretty straightforward once you've > mastered it, but most of the world hasn't mastered it, so you have to > take that into account. > > The other option is to use some third party tools like Quest's Migration > Manager, which works extremely well (again, if you implement it right) > and doesn't necessarily have to use the ADC. > > The third option is a low-tech, low functionality option. Do a directory > export of your 5.5 dir, do an exmerge of all the mailboxes. Then import > the directory into your new AD implementation (is it new or do you > already have one? I'm betting you've had AD in your environment for > awhile). Create mailboxes for all your accounts, and then exmerge the > mail in. > > These are the options off the top of my head, although there are more. > It really depends on the business needs surrounding the migration. How > many sites, what kind of bandwidth, how many users, how much data, on > and on. > > www.m3tg.com > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Neil > Doody > Sent: Tuesday, July 25, 2006 8:32 AM > To: Exchange Discussions > Subject: RE: Repercussions of the active directory connector. > > Any info would be great :) > > Have done migrations before but its always been to a new setup with a > new > domain so never been down the root of having to integrate the two, > something > I would prefer to steer clear of if I'm honest! > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:bounce- > > [EMAIL PROTECTED] On Behalf Of Couch, Nate > > Sent: 25 July 2006 12:35 > > To: Exchange Discussions > > Subject: RE: Repercussions of the active directory connector. > > > > Neil, > > > > We have one customer with such a setup and there were some issues with > > directory replication and permissions, I think. I know we had to go > to > > MS PSS as well, but to be honest, this customer did their migration in > > all the wrong ways. Instead of getting it done in a timely manner > (like > > less than a month) they chose, despite our efforts to convince them > > otherwise, to take almost 1.5 years to upgrade. Much of this was the > > result of our team not having control over the entire environment. > Not > > a pretty migration when you have to deal with control freaks in seven > > different countries. > > > > I will try to get more details if you want them. The Administrator > who > > worked the migration from our team is not in yet. > > > > Nate > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > Neil > > Doody > > Sent: Tuesday, July 25, 2006 6:17 AM > > To: Exchange Discussions > > Subject: Repercussions of the active directory connector. > > > > We are looking to use ADC to connect exchange 5.5 to exchange 2003 > soon > > but > > one of the guys here has heard there are repercussions of migrating > this > > way > > as there are problems when you try to go exchange 2003 alone? > > > > Apparently it was such a bad problem they had to go to > > Microsoft......wow > > that is bad. > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange > > To subscribe: http://e-newsletters.internet.com/discussionlists.html/ > > To unsubscribe send a blank email to > > [EMAIL PROTECTED] > > Exchange List admin: [EMAIL PROTECTED] > > To unsubscribe via postal mail, please contact us at: > > Jupitermedia Corp. > > Attn: Discussion List Management > > 475 Park Avenue South > > New York, NY 10016 > > > > Please include the email address which you have been contacted with. > > > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange > > To subscribe: http://e-newsletters.internet.com/discussionlists.html/ > > To unsubscribe send a blank email to [EMAIL PROTECTED] > > dl.sparklist.com > > Exchange List admin: [EMAIL PROTECTED] > > To unsubscribe via postal mail, please contact us at: > > Jupitermedia Corp. > > Attn: Discussion List Management > > 475 Park Avenue South > > New York, NY 10016 > > > > Please include the email address which you have been contacted with. > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange > To subscribe: http://e-newsletters.internet.com/discussionlists.html/ > To unsubscribe send a blank email to > [EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > To unsubscribe via postal mail, please contact us at: > Jupitermedia Corp. > Attn: Discussion List Management > 475 Park Avenue South > New York, NY 10016 > > Please include the email address which you have been contacted with. > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange > To subscribe: http://e-newsletters.internet.com/discussionlists.html/ > To unsubscribe send a blank email to [EMAIL PROTECTED] > dl.sparklist.com > Exchange List admin: [EMAIL PROTECTED] > To unsubscribe via postal mail, please contact us at: > Jupitermedia Corp. > Attn: Discussion List Management > 475 Park Avenue South > New York, NY 10016 > > Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
