Sorry, my instructions were aimed at improving your hdparm performance (under 7.1). You should be able to install on udma33, then make changes to your /etc/fstab, add the append lines to lilo/grub and then reboot (assuming the patches are applied to the stock kernel). Unfortunately I can't tell you much about 7.2 as I am still waiting for my beta3 CD. Buchan Pascal Gross� wrote: > > On Tue, Oct 17, 2000 at 03:57:11PM +0200, Buchan Milne wrote: > > You need to ensure that you are actually using dma66. You will probably > > see a line like the following in your /etc/lilo.conf or > > /boot/grub/menu.lst: > > ide2=0x????,0x???? ide3=0x????,0x???? where a ? is a hex value. This > > indicates that you are using the dma66 controller in > > backwards-compatible mode. What you need to do is change it to read: > > > > ide2=dma ide3=dma > > (do this in a new lilo/grub entry, because if it doesn't work, you might > > have problems). > > > > You might also want to look at this page: > > http://www.csie.ntu.edu.tw/~b6506063/hpt366/ > > > > Thank you for the page, but i already saw it :-) > > Anyway, the problem is not about a parameter for grub and/or lilo. The > system freeze during the _installation_ boot over the CD. If i put the hd > in udma 0 mode (in the bios), the installation goes as long as the > repartitionning. But it also freeze during the format. > > I must add that when i put the hd on the more classic udma 33 port, all > works well. But it is not a very satisfactory solution, isn't it ? And htp > 366 is supposed to work flawlessly on linux, at least with mdk 7.2. > > Pascal > > ------------------------------------------------------------------------ > Keep in touch with http://mandrakeforum.com: > Subscribe the "[EMAIL PROTECTED]" mailing list. -- |--------------------------------------------------------------| Buchan Milne Mechanical Engineer, Network Manager Cellphone +27824722231 email mailto:[EMAIL PROTECTED] Centre for Automotive Engineering http://www.cae.co.za South Africas first satellite: http://sunsat.ee.sun.ac.za Control Models http://www.control.co.za |----------------Registered Linux User #182071-----------------|
Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
