My HPT366 mode shows 4 in the HPT blue screen. Perhaps you should change your mode to either 2 or 4 Don .... On Tue, 17 Oct 2000, you wrote: > > On Tue, Oct 17, 2000 at 03:57:11PM +0200, Buchan Milne wrote: > > You need to ensure that you are actually using dma66. You will probably > > see a line like the following in your /etc/lilo.conf or > > /boot/grub/menu.lst: > > ide2=0x????,0x???? ide3=0x????,0x???? where a ? is a hex value. This > > indicates that you are using the dma66 controller in > > backwards-compatible mode. What you need to do is change it to read: > > > > ide2=dma ide3=dma > > (do this in a new lilo/grub entry, because if it doesn't work, you might > > have problems). > > > > You might also want to look at this page: > > http://www.csie.ntu.edu.tw/~b6506063/hpt366/ > > > > Thank you for the page, but i already saw it :-) > > Anyway, the problem is not about a parameter for grub and/or lilo. The > system freeze during the _installation_ boot over the CD. If i put the hd > in udma 0 mode (in the bios), the installation goes as long as the > repartitionning. But it also freeze during the format. > > I must add that when i put the hd on the more classic udma 33 port, all > works well. But it is not a very satisfactory solution, isn't it ? And htp > 366 is supposed to work flawlessly on linux, at least with mdk 7.2. > > Pascal > > ---------------------------------------- Content-Type: text/plain; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---------------------------------------- -- 73 de KK6WJ
Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
