Hi Dave, Bob Jordan here. I only Solo II my car and may be selling it soon.
But if I were to buy another some day if it wasn't from Arrow Cars, I have
taken pictures of their car at their shop, then it would be from Q, seeing I
am from Rhode Island. I like the looks of the body and the pics of your car
with the open cockpit is great for us big older guys. I will keep you in
mind if my finances change!
Thanks
Bobby
#5 Fmod NER SCCA
----- Original Message -----
From: "Dave Craddock" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, February 08, 2007 6:52 PM
Subject: Re: [F500] new body for KBS and Q-cars
Edward,we have no imperical data (wind tunnel or CFD) regarding this body
having worked with Jay Novak over the years (we build the Novakar
bodies,but only the top body on the Rakavon) and doing a lot of reading
and having a reasonable eye for what looks good and having designed
/built a few other body kits and overal race car bodies I think i have
enough background to undertake a project like this. True, high noses are
to promote air flow to the front wing however I don't see how the high
nose is going to hurt anything either and one can ,and I assume would
,put a splitter on the bottom of the nose to help balance the aero. the
nose itself was not intended to balance the air flow neccescarily by
itself,And the fit of the body panels on most of the kbs cars is not good
therefore any percieved aero advantage to the design is lost as far as I
can tell.
This body was designed for easy access to the car by one person.
To offer a smooth clean design that can be adapted to frame mods for
larger drivers.
To exploit aero dynamics within the rules.
To offer a more modern image to the current crop of cars.
I've recieved a lot of positive response,but you can't please everybody,
it is what it is!
Dave Craddock http://preformresources.com/
----- Original Message -----
From: "edward capullo" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, February 08, 2007 5:33 PM
Subject: Re: [F500] new body for KBS and Q-cars
Dave
I have a couple of dumb questions. Has this bodywork or a scale model
thereof been wind tunnel tested? I am on the sports racer site a bit and
they go extensively into aerodynamics. It would seem the shark nose ala
F1 etc was designed to be used with a front wing and we don't have them
on F500s.(yet) Wouldnt the slope nose of something such as the Red Devil
or a Novakar front end design be more practical? How about the
KBS/Invader nose as is with a splitter on the front and sides with the
sides slotted for the suspension pieces? Do you have any airflow figures
that show the nose as shown balances off the extended tail and diffuser
downforce.
Captain Eddie
PS: Chris--do you really need aero in Solo? I thought the speeds were
restricted.
From: "Dave Craddock" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: <[email protected]>
Subject: Re: [F500] new body for KBS and Q-cars
Date: Thu, 8 Feb 2007 16:32:38 -0500
Chris,i don't see why it won't work it's just that the long tail and the
proximity to the diffuser help work together,there are a couple chassis
out there that run the tail shorter than the diffuser.
Dave
----- Original Message ----- From: "Chris Reinhardt"
<[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, February 07, 2007 9:46 PM
Subject: Re: [F500] new body for KBS and Q-cars
Should I use poly/e-glass oars or go for the carbon?
Thanks Dave, do you think the diffuser will work with Mike's bodywork?
Thanks...
Dave Craddock <[EMAIL PROTECTED]> wrote:
Chris,yes the diffuser will be available seperately in poly/e-glass
foam
core $370.00 in carbon/epoxy- honeycomb$650.00,you will have to supply
the
oars however.
Dave Craddock
----- Original Message ----- From: "Chris Reinhardt"
To:
Sent: Tuesday, February 06, 2007 5:33 PM
Subject: Re: [F500] new body for KBS and Q-cars
Dave, is the diffuser sold separate and if so how much?
CR
Dave Craddock
wrote:
Kenneth, I'm trying to put together an info sheet to forward,meanwhile
the
price for the kit is $2250. I'll send you more info in a couple
days,thanx
Dave Craddock
----- Original Message ----- From: "Kenneth Kirkland"
To:
Sent: Monday, February 05, 2007 11:51 AM
Subject: Re: [F500] new body for KBS and Q-cars
Dave,
What's the price tag on the new body?
Kenneth Kirkland
#18 MiDiv / Arkansas Region (77)
1991 KBS Mk. V
www.kirklandracing.com
--- Dave Craddock
wrote:
Guys here's a look at our new body to replace the
KBS or Q-cars bodywork.Three
main sections and suspension closeouts
Dave Craddock
http://preformresources.com/gallery/KBS-F-500-REBODY-KIT
________________________________
FormulaCar Magazine - A Proud Supporter of Formula
500
The Official Publication of Junior Formula Car
Racing
Subscribe Today! www.formulacarmag.com or
519-624-2003
---------------------------------
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out.
---------------------------------
Never Miss an Email
Stay connected with Yahoo! Mail on your mobile. Get started!
________________________________
FormulaCar Magazine - A Proud Supporter of Formula 500
The Official Publication of Junior Formula Car Racing
Subscribe Today! www.formulacarmag.com or 519-624-2003
_________________________________
_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***
