That's retail one offs, not production. I would hope that if the material was bought in quantity and not from McMaster, and the plate were hogged out on a CNC, it would at least the 1/2 time... Not a good comparison to your production line. CR
Daryle Redlin <[EMAIL PROTECTED]> wrote: Hi , Well I'm not so sure about that. The raw cost of his materials is 139.24 plus labor. He figures that it takes at least an hour. 60 per hour is a standard rate. That puts it at 199.24. Plus the fasteners,build time, polishing of the center etc. Of course he doesn't have to box or package it and he doesn't have a shop overhead either. In the past we retailed these wheels for about 120 to 140. Barely sold any. When we factor in the cost to set up equipment to make a couple of parts the cost goes way up. If we were selling even five sets a month the cost would come way down. But we don't. Even with all things considered our current pricing is only about 50 dollars more than his costs. Our f500 wheels usually came in at about 4 lbs or so. I'm curious to see the weight. The build looks well thought out and I'm sure will work out fine for the application. Button head bolts are not really meant for that type of application and wouldn't suggest you use them. Best of luck. Daryle ----- Original Message ----- From: "Chris Reinhardt" To: Sent: Tuesday, March 27, 2007 2:29 PM Subject: Re: [F500] Wheels > A hell of lot cheaper than yours!!! > > CR > > Daryle Redlin wrote: > Dave, > > What was the total cost of the parts and what was your total time to > produce. The most important question of course, is what do they weigh? > > Daryle > Kodiak Motorsports Inc. > > ----- Original Message ----- > From: > To: > Sent: Monday, March 26, 2007 5:22 PM > Subject: Re: [F500] Wheels > > >> That's a nice piece of work, dude. >> >> You need to do some pricing before folks overwhelm you with requests. >> >> dg >> >> ----- Original Message ----- >> From: "Jim's Lawn Shop" >> To: >> Sent: Monday, March 26, 2007 4:25 PM >> Subject: [F500] Wheels >> >> >>>A few weeks ago I asked about wheels and mentioned doing my own centers. >>> Well I had some time this weekend to rough them out. >>> A few people wondered how it was going so here you go. >>> Nothing special and they still need debur and polishing. >>> http://i125.photobucket.com/albums/p65/FM117/F-Mod%20car/139_3968.jpg >>> http://i125.photobucket.com/albums/p65/FM117/F-Mod%20car/139_3967-1.jpg >>> http://i125.photobucket.com/albums/p65/FM117/F-Mod%20car/139_3965.jpg >>> Dave Phaneuf > > > > --------------------------------- > TV dinner still cooling? > Check out "Tonight's Picks" on Yahoo! TV. --------------------------------- Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. ________________________________ FormulaCar Magazine - A Proud Supporter of Formula 500 The Official Publication of Junior Formula Car Racing Subscribe Today! www.formulacarmag.com or 519-624-2003 _________________________________ _______________________________________________ F500 mailing list - [email protected] To unsubscribe or change options please visit: http://f500.org/mailman/listinfo/f500 *** Please, DO NOT send unsubscribe requests to the mailing list! ***
