My whole installation process is the following $ virtualenv dolfin-1.5-venv $ source dolfin-1.5-venv/bin/activate $ pip install numpy sympy six ply $ pip install https://bitbucket.org/fenics-project/ufl/downloads/ufl-1.5.0.tar.gz $ pip install https://bitbucket.org/fenics-project/instant/downloads/instant-1.5.0.tar.gz $ pip install https://bitbucket.org/fenics-project/fiat/downloads/fiat-1.5.0.tar.gz $ pip install https://bitbucket.org/fenics-project/ffc/downloads/ffc-1.5.0.tar.gz
None of these tell me ANY errors. I go on with $ wget https://bitbucket.org/fenics-project/dolfin/downloads/dolfin-1.5.0.tar.gz $ tar xzvf dolfin-1.5.0.tar.gz $ cd dolfin-1.5.0/ $ mkdir build $ cd build $ cmake -DCMAKE_INSTALL_PREFIX=$VIRTUAL_ENV .. $ make -j5 install Again, no errors i can spot! Then I am advised to source a PATH config $ source /home/$USERNAME/dev/fenics/dolfin-1.5-venv/share/dolfin/dolfin.conf on running an example i get this: $ cat /home/$USERNAME/.instant/error/ffc_form_ce4f228b8aea5046137150d0bd433bb69019d720/compile.log -- The C compiler identification is GNU 4.8.4 -- The CXX compiler identification is GNU 4.8.4 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done CMake Error at CMakeLists.txt:12 (INCLUDE): include could not find load file: /usr/local/share/ufc/UseUFC.cmake -- Found SWIG: /usr/bin/swig (found version "2.0.11") -- Configuring incomplete, errors occurred! See also "/tmp/tmpCCDOAD2015-6-19-20-11_instant_21bbb301d6140c6ed460db266a76cff13c305980/ffc_form_ce4f228b8aea5046137150d0bd433bb69019d720/CMakeFiles/CMakeOutput.log". On Sat, Jun 20, 2015 at 9:58 AM, Johannes Ring <[email protected]> wrote: > Try to install FFC again and see if you can spot any errors. > > Johannes > > On Fri, Jun 19, 2015 at 9:55 PM Julian Andrej <[email protected]> wrote: >> >> Hello, >> >> i installed the dolfin-tools (ufl/ufc/ffc/instant) into a virtualenv. >> On running an example i get the following error >> >> -- Detecting CXX compiler ABI info >> -- Detecting CXX compiler ABI info - done >> CMake Error at CMakeLists.txt:12 (INCLUDE): >> include could not find load file: >> >> /usr/local/share/ufc/UseUFC.cmake >> >> which corresponds to a Debian Bugreport (see >> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=782317) >> >> I installed everything via pip for example with >> >> pip install >> https://bitbucket.org/fenics-project/instant/downloads/instant-1.5.0.tar.gz >> >> Dolfin is installed via >> >> mkdir build >> cd build >> cmake -DCMAKE_INSTALL_PREFIX=$VIRTUAL_ENV .. >> make -j5 install >> >> I cannot build the current git versions (master branches) because >> dolfin compilation fails with >> In file included from >> >> /home/****/dev/fenics/fenics-project-dolfin-7ca3fda8087c/dolfin/multistage/PointIntegralSolver.cpp:38:0: >> >> /home/atomic/dev/fenics/fenics-project-dolfin-7ca3fda8087c/dolfin/fem/UFC.h:130:33: >> error: ‘vertex_integral’ is not a member of ‘ufc’ >> _______________________________________________ >> fenics-support mailing list >> [email protected] >> http://fenicsproject.org/mailman/listinfo/fenics-support _______________________________________________ fenics-support mailing list [email protected] http://fenicsproject.org/mailman/listinfo/fenics-support
