Hi Guys, Is anyone going to do some tutorial / wiki / page about how to finally install dolfin inside virtual environment without problems and polluting global installation? It would be super useful.
Best, Rafal 2015-06-22 17:26 GMT+02:00 Julian Andrej <[email protected]>: > With the prefix option it works flawlessly. > > Maybe this installation method should be noted on the webpage, because > it is way easier than any other method besides a distribution package. > > On Mon, Jun 22, 2015 at 9:00 AM, Johannes Ring <[email protected]> wrote: > > The problem is that FFC assumes that it will be installed in /usr/local > if > > no --prefix option is given, so you end up with the wrong path to > > UseUFC.cmake in dolfin-1.5-venv/share/ufc/UFCConfig.cmake. You can fix > this > > by running pip with the --prefix option like this: > > > > pip install --install-option="--prefix=$VIRTUAL_ENV" > > https://bitbucket.org/fenics-project/ffc/downloads/ffc-1.5.0.tar.gz > > > > I am tempted to revert > > https://bitbucket.org/fenics-project/ffc/commits/12cb900, which should > fix > > this problem. Using sys.prefix as default is better than hard-coding it > to > > /usr/local IMO. > > > > Johannes > > > > > > On Sun, Jun 21, 2015 at 12:11 PM Julian Andrej <[email protected]> > wrote: > >> > >> My whole installation process is the following > >> > >> $ virtualenv dolfin-1.5-venv > >> $ source dolfin-1.5-venv/bin/activate > >> $ pip install numpy sympy six ply > >> $ pip install > >> https://bitbucket.org/fenics-project/ufl/downloads/ufl-1.5.0.tar.gz > >> $ pip install > >> > https://bitbucket.org/fenics-project/instant/downloads/instant-1.5.0.tar.gz > >> $ pip install > >> https://bitbucket.org/fenics-project/fiat/downloads/fiat-1.5.0.tar.gz > >> $ pip install > >> https://bitbucket.org/fenics-project/ffc/downloads/ffc-1.5.0.tar.gz > >> > >> None of these tell me ANY errors. I go on with > >> > >> $ wget > >> > https://bitbucket.org/fenics-project/dolfin/downloads/dolfin-1.5.0.tar.gz > >> $ tar xzvf dolfin-1.5.0.tar.gz > >> $ cd dolfin-1.5.0/ > >> $ mkdir build > >> $ cd build > >> $ cmake -DCMAKE_INSTALL_PREFIX=$VIRTUAL_ENV .. > >> $ make -j5 install > >> > >> Again, no errors i can spot! > >> > >> Then I am advised to source a PATH config > >> > >> $ source > >> /home/$USERNAME/dev/fenics/dolfin-1.5-venv/share/dolfin/dolfin.conf > >> > >> on running an example i get this: > >> > >> $ cat > >> > /home/$USERNAME/.instant/error/ffc_form_ce4f228b8aea5046137150d0bd433bb69019d720/compile.log > >> -- The C compiler identification is GNU 4.8.4 > >> -- The CXX compiler identification is GNU 4.8.4 > >> -- Check for working C compiler: /usr/bin/cc > >> -- Check for working C compiler: /usr/bin/cc -- works > >> -- Detecting C compiler ABI info > >> -- Detecting C compiler ABI info - done > >> -- Check for working CXX compiler: /usr/bin/c++ > >> -- Check for working CXX compiler: /usr/bin/c++ -- works > >> -- Detecting CXX compiler ABI info > >> -- Detecting CXX compiler ABI info - done > >> CMake Error at CMakeLists.txt:12 (INCLUDE): > >> include could not find load file: > >> > >> /usr/local/share/ufc/UseUFC.cmake > >> > >> > >> -- Found SWIG: /usr/bin/swig (found version "2.0.11") > >> -- Configuring incomplete, errors occurred! > >> See also > >> > "/tmp/tmpCCDOAD2015-6-19-20-11_instant_21bbb301d6140c6ed460db266a76cff13c305980/ffc_form_ce4f228b8aea5046137150d0bd433bb69019d720/CMakeFiles/CMakeOutput.log". > >> > >> > >> > >> On Sat, Jun 20, 2015 at 9:58 AM, Johannes Ring <[email protected]> > wrote: > >> > Try to install FFC again and see if you can spot any errors. > >> > > >> > Johannes > >> > > >> > On Fri, Jun 19, 2015 at 9:55 PM Julian Andrej <[email protected]> > >> > wrote: > >> >> > >> >> Hello, > >> >> > >> >> i installed the dolfin-tools (ufl/ufc/ffc/instant) into a virtualenv. > >> >> On running an example i get the following error > >> >> > >> >> -- Detecting CXX compiler ABI info > >> >> -- Detecting CXX compiler ABI info - done > >> >> CMake Error at CMakeLists.txt:12 (INCLUDE): > >> >> include could not find load file: > >> >> > >> >> /usr/local/share/ufc/UseUFC.cmake > >> >> > >> >> which corresponds to a Debian Bugreport (see > >> >> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=782317) > >> >> > >> >> I installed everything via pip for example with > >> >> > >> >> pip install > >> >> > >> >> > https://bitbucket.org/fenics-project/instant/downloads/instant-1.5.0.tar.gz > >> >> > >> >> Dolfin is installed via > >> >> > >> >> mkdir build > >> >> cd build > >> >> cmake -DCMAKE_INSTALL_PREFIX=$VIRTUAL_ENV .. > >> >> make -j5 install > >> >> > >> >> I cannot build the current git versions (master branches) because > >> >> dolfin compilation fails with > >> >> In file included from > >> >> > >> >> > >> >> > /home/****/dev/fenics/fenics-project-dolfin-7ca3fda8087c/dolfin/multistage/PointIntegralSolver.cpp:38:0: > >> >> > >> >> > >> >> > /home/atomic/dev/fenics/fenics-project-dolfin-7ca3fda8087c/dolfin/fem/UFC.h:130:33: > >> >> error: ‘vertex_integral’ is not a member of ‘ufc’ > >> >> _______________________________________________ > >> >> fenics-support mailing list > >> >> [email protected] > >> >> http://fenicsproject.org/mailman/listinfo/fenics-support > >> _______________________________________________ > >> fenics-support mailing list > >> [email protected] > >> http://fenicsproject.org/mailman/listinfo/fenics-support > _______________________________________________ > fenics-support mailing list > [email protected] > http://fenicsproject.org/mailman/listinfo/fenics-support >
_______________________________________________ fenics-support mailing list [email protected] http://fenicsproject.org/mailman/listinfo/fenics-support
