After waiting several hours, doing a bunch of googles with no luck, and
reading and rereading the book that came with the loom, I decided to try
winding on the 1st section in spite of the problem of winding on top of
the warp extension cords.
All I can say is, I'm NOT impressed by sectional warping, if this is the
way it's supposed to be done. This sloppiness of tension would not be
acceptable to me on any regular-beam loom.
And of COURSE the turn counter doesn't work now that Zack is not
available. <growling> So I've had to pull the section off again to
wait til he's home and can look at it--I've done my poking, prodding,
and other attempts to fix it to no avail.
On the plus side for a dumpy day, for a little while it snowed fairly
nicely. It's really a bummer to have a winter with so little snow.
Disastrous for the local businesses that depend upon skiers and
snowmobilers to make ends meet, too. Several ski resorts have laid off
as many as 40-50 employees each.
Holly
steaming enough to melt snow!
To stop mail temporarily mailto:[EMAIL PROTECTED]
with the message: set nomail To restore send: set mail
