Could this be a "dry contact" relay problem, where the contacts aren't gold plated for dry-switching, and there isn't enough current through the relay contacts to clean the oxide layer? George, PJ5/KJ6VW
On 9/6/2010 12:59, Jordan wrote: > I've had this probem as well, and it appeared to worsen with > heat....Relay contact issues it would appear.....73..Jordan VE6ZT > > > ----- Original Message ----- From: "George Steube" <[email protected]> > To: "Gerald Youngblood" <[email protected]>; "Gerald Donnelly" > <[email protected]> > Cc: <[email protected]> > Sent: Monday, September 06, 2010 10:48 AM > Subject: Re: [FlexEdge] Flex 5000a--Sudden drop in noise > floor--lossofsensitvity > > >> Hi Gerald, >> I have seen the same problem using XP/2.0.8/Flex 5KA. I have >> inserted an >> earlier email on the problem below. I am still trying to figure out >> if this >> is a software or hardware problem. I have a couple of test yet to >> run and >> if you have any suggestions I would be happy to try them, >> unfortunately the >> problem is intermittent so it makes harder to fix. >> Best regards, >> George >> W2GS _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
