> Ralph maybe a buffer or VAC audio setting and Jordan maybe a resource or antenna switching issue, may take several exchanges to figure what is happening with both.. So let's take these off the reflector and handle directly, no need to take up the reflector bandwidth..
Hello Dudley, I'll make one last general post about this as it may affect some other folks as well. After a couple of hours of trying things one step at a time and writing everything down, I found that the problem seems to be the related to the sampling rate set in PSDR when using VAC. Although the manual for PSDR 1.18.6 says to use 44,000 for the best results with the least chance of audio dropouts, I found exactly the opposite to be true in my case. Running with either WinPSKse or WinWarbler with VAC, the only way I can eliminate the dropouts is to use a sample rate of 8000. That works perfectly. As the sample rate increases, so does the frequency of the dropouts. I also noticed that I saw the dropouts when I had just VAC enabled, even with all PSK software shut down. YMMV. 73, Ralph W5JGV - WD2XSH/7 _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
