Based on the STOP code 0x0000010d, you have had WDF violation. wdf01000.sys is the WDF Dynamic - Kernel Mode Driver Framework Runtime module and a hardware device driver that uses the framework has caused the actual error. Based on the parameter 1 info provided, the errant device driver has encountered an operation which occurred on a DMA transaction object while it was not in the correct state.
Unfortunately, the actual driver that is causing the problem is not identified by the info provided. For the "shotgun" approach to figuring out what this is other than doing an analysis on the crash dump (if one is actually created) is to do all of the Windows Updates and update all of your device drivers, especially the motherboard chipset and integrated devices. Some STOP Errors can be caused by viruses. Make sure your virus software is up to date and perform a virus scan. Make sure that all of your cables and other components inside your computer case are properly attached and seated. If you have hardware not in securely installed you may receive STOP Errors. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Vandenberg Sent: Friday, October 08, 2010 10:57 AM To: [email protected]; [email protected] Subject: [FlexEdge] Win7-32 Kernel mode errors PSDR 2.0.8 About once a month I get this error (blue screen). Anyone else getting them? ================================================================================ A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Wdf01000.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000010d (0x00000008, 0x795485c8, 0x00000003, 0x8690af08) *** Wdf01000.sys - Address 0x82f81f9e base at 0x82f41000 DateStamp 0x4a5bbf28 John, ve3dvv _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
