On Sunday 19 Dec 2004 20:54, Roy Vegard Ovesen wrote:
> On Sunday 19 December 2004 19:46, Dave Martin wrote:
> > Any feedback you can give me is greatly appreciated :-)
>
> The Compass is invisible from outside. You can fix this by adding a name
> tag to the part where the compass model gets included, and then adding it
> to the bottom of the InteriorGroup group, around line 330 in
> Models/c172p.xml. When you can see the compass from the outside you will
> see that it floats in mid air over the glareshield, so you might want to
> move it down a bit.
>
> Also the instruments are floating a few cm from the panel, this is evident
> when you look at it at an angle. You can remove the PanelInstruments and
> ControlsGroup warnings if you remove all references to PanelInstruments in
> Models/c172p.xml.
>
> It is still possible to see the instruments through the nav- and
> beacon-lights. But I guess this is something that has to be fixed in the
> code.

Cheers, I'll have a look at those points. I noticed the instrument lights 
showing through but they don't have a texture so my trick with the panel wont 
work. :(

Also of note; the panel being too far out means that I've totally mucked up my 
geometries :-S Oh well, my own fault ;)

_______________________________________________
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel
2f585eeea02e2c79d7b1d8c4963bae2d

Reply via email to