Hi, I had what I had was similar issues and it was the printer settings, It always scaled to fit the physical print area of the printer. Now if I want to check it I open the pdf in acrobat set the scale to 100% and measure off the screen!
-----Original Message----- From: Manuel Mall [mailto:[EMAIL PROTECTED] Sent: Thursday, 9 March 2006 9:59 AM To: [email protected] Subject: Re: image sizing issue. On Thursday 09 March 2006 06:27, Jason R Briggs wrote: > Sorry. using svn trunk. > > I've tried explicitly setting the width as well, but it made no > difference. Removing the margin on simple-page-master also makes no > difference (plus I was already setting margin on the graphic element > as well, so that should override anyway....?) > Have you checked that your print settings are not containing any scaling, e.g. "scaled to fit", "Fit to page" or similar? Manuel > J > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] NOTICE This e-mail and any attachments are confidential and may contain copyright material of Macquarie Bank or third parties. If you are not the intended recipient of this email you should not read, print, re-transmit, store or act in reliance on this e-mail or any attachments, and should destroy all copies of them. Macquarie Bank does not guarantee the integrity of any emails or any attached files. The views or opinions expressed are the author's own and may not reflect the views or opinions of Macquarie Bank. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
