This message is from the T13 list server.

Jim,

    Thanks for the clarification on that.

Gary Laatsch
[EMAIL PROTECTED]

----- Original Message ----- 
From: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, November 03, 2003 8:43 AM
Subject: Re: [t13] ATA/ATAPI-8 suggestions list


> This message is from the T13 list server.
>
>
>
> There is no 'serial atapi' proposal. I merely recorded the fact that
> questions about
> ATAPI via the Serial ATA interface are starting to surface more frequently
> on the
> reflector and elsewhere.
>
> T13 has a copyright release from the SATA working group, but is not 'free'
> to change
> technical content, but is allowed to consider clarifications.
>
> The T13 liason to the SATA working group (Dan Colgrove) does ask the SATA
> working
> group for approval on some items, and the T13 members who are also SATA
> working group
> members have feedback in both groups.
>
> Thank You !!!
> -----------------------------------------------------------------
> Jim Hatfield
> ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
> Seagate Technology - PSG
>    e-mail:  [EMAIL PROTECTED]
>    s-mail:  389 Disc Drive;  Longmont, CO 80503 USA
>    voice:   720-684-2120
>    fax    :    720-684-2711
> ====================================================
>
>
> |---------+---------------------------->
> |         |           "Gary Laatsch"   |
> |         |           <[EMAIL PROTECTED]|
> |         |           ell.net>         |
> |         |           Sent by:         |
> |         |           [EMAIL PROTECTED]|
> |         |           rg               |
> |         |           No Phone Info    |
> |         |           Available        |
> |         |                            |
> |         |           11/01/2003 10:55 |
> |         |           AM               |
> |         |                            |
> |---------+---------------------------->
>
>---------------------------------------------------------------------------
---------------------------------------------------|
>   |
|
>   |       To:       <[EMAIL PROTECTED]>
|
>   |       cc:
|
>   |       Subject:  Re: [t13] ATA/ATAPI-8 suggestions list
|
>
>---------------------------------------------------------------------------
---------------------------------------------------|
>
>
>
>
> This message is from the T13 list server.
>
>
> I haven't looked at the meeting minutes to see what discussions may or may
> not have occurred (the minutes are usually just general anyway), but just
> curious:
>
> If there is a Serial ATAPI proposal (and SATA-2 would fall into this
> question as well) and is being considered for inclusion in ATAPI-8, I will
> ask the same question I asked before we decided to include SATA 1.0.
>
>     Will T13 be allowed to add, delete or modify everything in this area
> without first getting approval from the Serail ATA committee?  Although
> this
> was answered "yes" for SATA 1.0, I don't believe (my opinion) that it's
> true.
>
> my $0.02,
>
> Gary Laatsch
> [EMAIL PROTECTED]
>
>
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, October 24, 2003 2:03 PM
> Subject: [t13] ATA/ATAPI-8 suggestions list (resend)
>
>
> > This message is from the T13 list server.
> >
> >
> > Here is a list of possible subjects for ATA/ATAPI-8 to consider.
> >
> > These are mostly gleaned from the outstanding issues list and from
> comments
> > made at this week's October 2003 plenary meeting.
> >
> > These are not necessarily for discussion at this time. I am just
'priming
> > the pump'
> > for others to add other suggestions to the list for December when we
> submit
> > a proposal
> > for an ATA/ATAPI-8 project.
> > -----------------------------
> > * Serial ATA
> >       - external interface (connectors, electrical, etc.)
> >       - serial ATAPI
> >       - LED
> >       - various issues involving bridges
> >             e03132r1 - ATAPI DMA Direction issues Proposal
> >       - incorporation of SATA 1.0a errata
> >       - incorporation of SATA-2 new features (native command queuing,
> etc.)
> >
> > * (e03138r0) Enterprise Extensions Smart Accessed (EESA)
> >
> > * (e02126r1) Write Wrong Proposal
> >
> > * ISO standardization
> >
> > * and some large questions to consider:
> >       - should support for PIO be dropped ?
> >       - should ATA/ATAPI-8 be the final standard to include parallel ATA
> ?
> >       - redo command volume to be interface-agnostic ?
> >       - redo command volume to be FIS-based ?
> >
> > Thank You !!!
> > -----------------------------------------------------------------
> > Jim Hatfield
> > ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
> > Seagate Technology - PSG
> >    e-mail:  [EMAIL PROTECTED]
> >    s-mail:  389 Disc Drive;  Longmont, CO 80503 USA
> >    voice:   720-684-2120
> >    fax    :    720-684-2711
> > ====================================================
> >
> >
>
>
>
>
>

Reply via email to